HZ Series sellf cooling hysteresis brake Hits：16475 AddTime：2021/9/10 10:06:54 There are three types of self cooling hysteresis brakes single output shaft brakes, double output shaft brakes and hollow shaft hysteresis brakes. It is widely used in the unwirding of high speed winding equipment,moret,small internal combustion engine,gearboxes and the simulated load of the lift test of other rotating devices the precise load of high-end sports equipment. HZ Self cooling hysteresis brake Model Rated torque Rated current Voltage Coil resistance at 25°±10％ Rated slip power Moment of inertia Max speed Weight 5min Continuous N•m mA VDC Ω（Ohm） watts watts kg•cm2 rpm Kg HZ-0.003 0.003 135 24 180 8 2 3.3×10-4 20000 0.12 HZ-0.02 0.02 192 24 125 25 6 1.5×10-3 20000 0.15 HZ-0.03 0.03 208 24 115 30 8 6.8×10-3 20000 0.21 HZ-0.05 0.05 208 24 115 30 8 6.8×10-3 20000 0.21 HZ-0.07 0.07 200 24 112 40 10 1.2×10-2 20000 0.26 HZ-0.1 0.1 200 24 120 55 15 4.6×10-2 20000 0.39 HZ-0.2 0.2 203 24 118 75 20 6.8×10-2 15000 0.51 HZ-0.3 0.3 390 24 62 120 35 1.8×10-1 15000 0.9 HZ-0.5 0.5 390 24 62 120 35 1.8×10-1 15000 0.9 HZ-1 1 400 24 60 320 80 1.1×100 15000 1.8 HZ-2 2 315 24 76 460 115 3.2×100 10000 3.5 HZ-3 3 750 24 32 680 165 6.8×101 10000 5.2 HZ-5 5 750 24 32 1000 200 1.3×101 10000 9.6 HZ-6 6 750 24 32 1000 200 1.4×101 10000 9.6 HZ-10 10 1200 24 20 1200 350 6.2×101 10000 21.8 HZ-12 12 1200 24 20 1200 350 6.2×101 10000 21.8 HZ-15 15 1200 24 20 1200 350 6.2×101 10000 21.8 【Refresh】【Favorites】【Print】 【Close】Previous：HZ-Q Series air cooling hysteresis brake Next：Introduction of Hysteresis Brake and Its Profile Technical Parameters
